Design and Construction of a Small Scale Sugarcane Juice Extractor
N. Oji
Department of Agricultural and Bioresources Engineering, Ahmadu Bello University, Zaria, Nigeria.
M. A. Gwarzo
Department of Agricultural and Bioresources Engineering, Ahmadu Bello University, Zaria, Nigeria.
U. S. Mohammed
Department of Agricultural and Bioresources Engineering, Ahmadu Bello University, Zaria, Nigeria.
I. Abubakar *
Department of Agricultural and Bo-Environmental Engineering, Waziri Umaru Federal Polytechnic, Birnin Kebbi, Nigeria.
J. K. Agunsoye
Department of Agricultural and Bioresources Engineering, Ahmadu Bello University, Zaria, Nigeria.
A. Zakariyah
Department of Agricultural and Bioresources Engineering, Ahmadu Bello University, Zaria, Nigeria.
E. I. Adamu
Department of Mechanical Engineering, Ahmadu Bello University, Zaria, Nigeria.
*Author to whom correspondence should be addressed.
Abstract
The production of sugarcane is increasing in Nigeria nowadays. Juice extracted from sugarcane can be used extensively in manufacturing brown sugar, industrial sugar and bioethanol fuel through the process of fermentation; hence, the need to develop a machine that can extract juice from sugarcane effectively. This work involves the design, fabrication and performance evaluation of sugarcane juice extractor. The machine was designed to extract juice from sugarcane at small scale level suitable for small and medium scale sugarcane processors. The prototype machine was designed, fabricated and assembled in the Department of Agricultural and Bio-resources Engineering, Ahmadu Bello University, Zaria. The machine consists of rollers, gears, cane guide, juice collector, frame, and prime mover. The developed machine was evaluated using koma variety of cane and obtained an output capacity of 148.2 kg/h and extraction efficiency of 67.44%, respectively at a speed of 30 rpm. The production cost stood at N 90,000 which is affordable and therefore recommended for small scale processors.
Keywords: Design, sugarcane juice, mechanical properties, extractor, processing.